Experiencing noises from your car is never relaxing. Especially persistent noises such as rubbing noises on Fiat Bravo that will disturb you and prevent you from cruising in the usual quiet environment that your car provides you. If you notice rubbing noise on Fiat Bravo, you are in the right place, our team has decided to prepare this content to help you find the source and stop it. This is why, first of all, we will look at the rubbing noises that can arise when you drive with your Fiat Bravo, and secondly, the rubbing noises that come from your engine block.
I acknowledge a rubbing noise on Fiat Bravo once I drive
Noise of rubbing from wheels
First, we will focus on rubbing noises that can be linked to wheel, be aware that in this content we will only explore the most traditional causes of rubbing noises on Fiat Bravo associated with your wheels, if you need a full guide on wheel noise on Fiat Bravo, it’s here.
- Rubbing noise based on your bearing
- Brake noise
One of the other possible causes of rubbing noise manifestations on your Fiat Bravo, may be that one of your bearing is tired, it will tend to make a loud noise that increase when stressed (turns faster and faster). So please remember to check by taking speed (neutral gear and window open to give consideration only to noise of the wheels) that the noise is well established here, if this is the case replace it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on Ancre_loud_noise, you will most likely find a solution to your trouble.
If you hear a rubbing noise on Fiat Bravo and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by getting rid of the wheel. If they are involved, replace them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want infos about it, read this guide for more information about brake noises on Fiat Bravo.
Noise of rubbing from under the car
Finally, a rubbing noise on your Fiat Bravo from the lower part of the chassis may be connected to a poor attachment of your exhaust to your car. Indeed, over time, vibrations, the pot fasteners on the car chassis can come off. In this instance, you must check, when cold, that the exhaust holds well, to achieve this try to make it move in different directions and check out how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In cases like this it will have to be replaced. If your exhaust is the trigger of this exhaust noise on Fiat Bravo, but the silent blocks are not the reason, consult this guide to find the trigger.
I acknowledge a rubbing noise on Fiat Bravo coming from the engine
If it is close to an engine noise rubbing on Fiat Bravo, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and cause this friction.So verify the state and try to find the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to happen in rpm, accelerate and position someone at the engine block to locate the area of origin of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also keep in mind to check the state of your belts, and replace them if required because it is the health of your car that is at stake. If you encounter belt noises on Fiat Bravo, we would suggest that you browse this content for more details on this subject.
