Listening noises from your vehicle is never relaxing. Especially constant noises such as rubbing noises on Acura TSX that will disturb you and prevent you from traveling in the usual quiet environment that your vehicle provides you. If you experience rubbing noise on Acura TSX, you are in the right place, our editorial staff has decided to compose this content to help you find the source and stop it. This is why, first of all, we will look into the rubbing noises that can appear when you drive with your Acura TSX, and secondly, the rubbing noises that originate from your engine block.
I listen a rubbing noise on Acura TSX when I drive
Noise of rubbing from wheels
First, we will focus on rubbing noises that can be caused by wheel, be aware that in this article content we will only investigate the most common causes of rubbing noises on Acura TSX in connection with your wheels, if you want a full report on wheel noise on Acura TSX, it’s here.
- Rubbing noise based on your bearing
- Brake noise
One of the other probable causes of rubbing noise manifestations on your Acura TSX, may be that one of your bearing is tired, it will tend to generate a loud noise that raises when stressed (turns faster and faster). So take into account to verify by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well based here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on Ancre_loud_noise, you will most likely find a remedy to your problem.
If you encounter a rubbing noise on Acura TSX and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To verify this, put your vehicle on safety stand, and verify the state of your discs and pads by getting rid of the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your vehicle, and you want explications about it, read this guide for more details about brake noises on Acura TSX.
Noise of rubbing from under the vehicle
Finally, a rubbing noise on your Acura TSX from the lower part of the chassis may be connected to a poor attachment of your exhaust to your car. Indeed, over time, vibrations, the pot fasteners on the vehicle chassis can come off. In this instance, you must verify, when cold, that the exhaust holds well, to achieve this try to make it move in different directions and observe how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is possible that a rubber mounts may have died . In cases like this it will have to be changed. If your exhaust is the trigger of this exhaust noise on Acura TSX, but the silent blocks are not the reason, read this guide to find the trigger.
I listen a rubbing noise on Acura TSX coming from the engine
If it is close to an engine noise rubbing on Acura TSX, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and cause this friction.So check the state and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to manifest in rpm, accelerate and position someone at the engine block to detect the area of origins of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also take into account to verify the state of your belts, and swap them if required because it is the health of your vehicle that is at stake. If you experience belt noises on Acura TSX, we recommend highly that you have a look at this content for more info on this subject.
