It is never pleasant to listen to a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you identify a reversing gear noise that continues on your Volkswagen Transporter 5? Any gearbox issue can be serious, but before making sure, it is better to do a few inspections. Our team has created this article to support you solve it. First, we will see what the sources and the different gearbox noises can be on Volkswagen Transporter 5, and second, what are the solutions available to you.
Classical reverse Volkswagen Transporter 5 noises and some tips to maintain your gearbox
Why does the reversing of my Volkswagen Transporter 5 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The sound made by the reversing of your Volkswagen Transporter 5 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will exert on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you listen to a reverse noise on your Volkswagen Transporter 5 if you shift gear under these conditions.
Diverse Volkswagen Transporter 5 reversing noises and their causes
Finally in this section, we will move on to what you are probably most interested in this document, to learn about the origin of reversing noise on Volkswagen Transporter 5. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your Volkswagen Transporter 5, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this document for more info about strut mount noises on Volkswagen Transporter 5.
An increased reverse knocking noise on Volkswagen Transporter 5X
If you are subject to a knocking noise when you are in reverse with your Volkswagen Transporter 5 and this noise tends to increase as you gain speed. It is possible that you are experiencing a serious issue that needs to be resolved rather quickly before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your automobile to your technician quickly or check out this content about gearbox noise on Volkswagen Transporter 5 for more data.
I discover a noise when I go in reverse
Listening a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Transporter 5 reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.
