It is never pleasing to discover a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that lasts on your Volkswagen T-roc? Any gearbox issue can be critical, but before making sure, it is better to do a few checks. Our team has made this article to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Volkswagen T-roc, and second, what are the solutions available to you.
Classical reverse Volkswagen T-roc noises and some tips to look after your gearbox
Why does the reversing of my Volkswagen T-roc make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise generated by the reversing of your Volkswagen T-roc is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will put in on the gears will be monumental and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Volkswagen T-roc if you shift gear under these conditions.
Different Volkswagen T-roc reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this content, to find out about the cause of reversing noise on Volkswagen T-roc. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Volkswagen T-roc, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this content for more details about strut mount noises on Volkswagen T-roc.
An increased reverse knocking noise on Volkswagen T-rocX
If you are subject to a knocking noise when you are in reverse with your Volkswagen T-roc and this noise tends to increase as you gain speed. It is possible that you are experiencing a serious issue that needs to be solved very fast before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your automobile to your repair shop quickly or browse this document about gearbox noise on Volkswagen T-roc for more data.
I notice a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen T-roc reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
