It is never pleasurable to perceive a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you detect a reversing gear noise that remains on your Volkswagen New Beetle? Any gearbox issue can be critical, but before making sure, it is better to do a few checks. Our team has made this content page to support you fix it. First, we will see what the origins and the different gearbox noises can be on Volkswagen New Beetle, and second, what are the solutions available to you.
Classical reverse Volkswagen New Beetle noises and some tips to protect your gearbox
Why does the reversing of my Volkswagen New Beetle make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound induced by the reversing of your Volkswagen New Beetle is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will put in on the gears will be significant and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Volkswagen New Beetle if you shift gear under these conditions.
Different Volkswagen New Beetle reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the origin of reversing noise on Volkswagen New Beetle. Here are the 3 typical sounds you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Volkswagen New Beetle, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this article for more information about strut mount noises on Volkswagen New Beetle.
An increased reverse knocking noise on Volkswagen New BeetleX
If you are subject to a knocking noise when you are in reverse with your Volkswagen New Beetle and this noise tends to increase as you gain speed. It is conceivable that you are dealing with a serious issue that needs to be solved as soon as possible before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your vehicle to your auto technician quickly or read this content about gearbox noise on Volkswagen New Beetle for more data.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen New Beetle reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
