It is never enjoyable to find out a sound on your automobile that you don’t know where it comes from. You may be wondering what to do when you find a reversing gear noise that remains on your Volkswagen Crafter 2? Any gearbox problem can be serious, but before making sure, it is better to do a few checks. Our team has made this paper to help you eliminate it. First, we will see what the origins and the different gearbox noises can be on Volkswagen Crafter 2, and second, what are the solutions available to you.
Classical reverse Volkswagen Crafter 2 noises and some tips to protect your gearbox
Why does the reversing of my Volkswagen Crafter 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound generated by the reversing of your Volkswagen Crafter 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will exert on the gears will be enormous and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you notice a reverse noise on your Volkswagen Crafter 2 if you shift gear under these conditions.
Different Volkswagen Crafter 2 reversing noises and their origins
Finally in this section, we will move on to what you are probably most interested in this page, to find out about the source of reversing noise on Volkswagen Crafter 2. Here are the 3 typical sounds you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Volkswagen Crafter 2, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to read this content for more details about strut mount noises on Volkswagen Crafter 2.
An increased reverse knocking noise on Volkswagen Crafter 2X
If you are subject to a knocking noise when you are in reverse with your Volkswagen Crafter 2 and this noise tends to build up as you gain speed. It is plausible that you are experiencing a serious problem that needs to be fixed as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your automobile to your auto mechanic quickly or browse this document about gearbox noise on Volkswagen Crafter 2 for more details.
I listen to a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Crafter 2 reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
