It is never pleasurable to hear a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that persists on your Volkswagen Caddy? Any gearbox trouble can be serious, but before making sure, it is better to do a few investigations. Our team has written this paper to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Volkswagen Caddy, and second, what are the solutions available to you.
Classical reverse Volkswagen Caddy noises and some tips to look after your gearbox
Why does the reversing of my Volkswagen Caddy make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise created by the reversing of your Volkswagen Caddy is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will exert on the gears will be significant and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you perceive a reverse noise on your Volkswagen Caddy if you shift gear under these conditions.
Diverse Volkswagen Caddy reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this page, to find out about the origin of reversing noise on Volkswagen Caddy. Here are the 3 typical sounds you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Volkswagen Caddy, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this document for more information about strut mount noises on Volkswagen Caddy.
An increased reverse knocking noise on Volkswagen CaddyX
If you are subject to a knocking noise when you are in reverse with your Volkswagen Caddy and this noise tends to build up as you gain speed. It is conceivable that you are experiencing a serious trouble that needs to be resolved right away before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears before long. Take your automobile to your mechanic quickly or read this document about gearbox noise on Volkswagen Caddy for more information.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Caddy reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
