It is never enjoyable to experience a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you notice a reversing gear noise that remains on your Volkswagen Atlas? Any gearbox trouble can be severe, but before making sure, it is better to do a few investigations. Our team has created this document to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Volkswagen Atlas, and second, what are the solutions available to you.reverse-gear-noise-volkswagen-atlas

Classical reverse Volkswagen Atlas noises and some tips to protect your gearbox

Why does the reversing of my Volkswagen Atlas make a different noise from my other speeds?

De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise induced by the reversing of your Volkswagen Atlas is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears employed for the reverse gear.

Tips to reduce wear on your clutch and gearbox

  • Don’t give a big boost:
    Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the automobile is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will put in on the gears will be significant and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Volkswagen Atlas if you shift gear under these conditions.

Diverse Volkswagen Atlas reversing noises and their triggers

Finally in this section, we will move on to what you are probably most excited about in this page, to learn about the source of reversing noise on Volkswagen Atlas. Here are the 3 typical noises you may be victim of.

I acknowledge a grinding noise when starting in reverse gear

If you experience a grinding noise when you start in reverse with your Volkswagen Atlas, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this content page for more information about strut mount noises on Volkswagen Atlas.

An increased reverse knocking noise on Volkswagen AtlasX

If you are subject to a knocking noise when you are in reverse with your Volkswagen Atlas and this noise tends to amplify as you gain speed. It is conceivable that you are dealing with a serious trouble that needs to be fixed very fast before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your automobile to your mechanic quickly or browse this article about gearbox noise on Volkswagen Atlas for more information.

I find out a noise when I go in reverse

Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Atlas reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.