It is never pleasurable to perceive a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that persists on your Toyota Matrix? Any gearbox issue can be critical, but before making sure, it is better to do a few investigations. Our team has made this paper to support you fix it. First, we will see what the origins and the different gearbox noises can be on Toyota Matrix, and second, what are the solutions available to you.
Classical reverse Toyota Matrix noises and some tips to maintain your gearbox
Why does the reversing of my Toyota Matrix make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise generated by the reversing of your Toyota Matrix is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will put in on the gears will be significant and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you perceive a reverse noise on your Toyota Matrix if you shift gear under these conditions.
Different Toyota Matrix reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the origin of reversing noise on Toyota Matrix. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Toyota Matrix, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this content page for more details about strut mount noises on Toyota Matrix.
An increased reverse knocking noise on Toyota MatrixX
If you are subject to a knocking noise when you are in reverse with your Toyota Matrix and this noise tends to amplify as you gain speed. It is conceivable that you are experiencing a serious issue that needs to be fixed rather quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your automobile to your auto mechanic quickly or check out this article about gearbox noise on Toyota Matrix for more details.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Toyota Matrix reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
