It is never pleasurable to acknowledge a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that continues on your Renault Twingo? Any gearbox issue can be important, but before making sure, it is better to do a few inspections. Our team has created this document to support you fix it. First, we will see what the origins and the different gearbox noises can be on Renault Twingo, and second, what are the solutions available to you.
Classical reverse Renault Twingo noises and some tips to maintain your gearbox
Why does the reversing of my Renault Twingo make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise made by the reversing of your Renault Twingo is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will apply on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you find out a reverse noise on your Renault Twingo if you shift gear under these conditions.
Different Renault Twingo reversing noises and their origins
Finally in this section, we will move on to what you are probably most curious about in this document, to find out about the origin of reversing noise on Renault Twingo. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Renault Twingo, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this content page for more information about strut mount noises on Renault Twingo.
An increased reverse knocking noise on Renault TwingoX
If you are subject to a knocking noise when you are in reverse with your Renault Twingo and this noise tends to amplify as you gain speed. It is plausible that you are going through a serious issue that needs to be fixed right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your vehicle to your auto technician quickly or browse this content about gearbox noise on Renault Twingo for more data.
I notice a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Twingo reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
