It is never pleasing to find out a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that lasts on your Renault Master 3? Any gearbox trouble can be critical, but before making sure, it is better to do a few inspections. Our team has written this content page to help you eliminate it. First, we will see what the sources and the different gearbox noises can be on Renault Master 3, and second, what are the solutions available to you.
Classical reverse Renault Master 3 noises and some tips to protect your gearbox
Why does the reversing of my Renault Master 3 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise made by the reversing of your Renault Master 3 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will put in on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you perceive a reverse noise on your Renault Master 3 if you shift gear under these conditions.
Diverse Renault Master 3 reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the cause of reversing noise on Renault Master 3. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Renault Master 3, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this content for more details about strut mount noises on Renault Master 3.
An increased reverse knocking noise on Renault Master 3X
If you are subject to a knocking noise when you are in reverse with your Renault Master 3 and this noise tends to amplify as you gain speed. It is plausible that you are experiencing a serious trouble that needs to be fixed as soon as possible before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your vehicle to your mechanic quickly or browse this article about gearbox noise on Renault Master 3 for more data.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Master 3 reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
