It is never enjoyable to discover a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you detect a reversing gear noise that lasts on your Peugeot 508? Any gearbox issue can be important, but before making sure, it is better to do a few checks. Our team has made this paper to support you solve it. First, we will see what the sources and the different gearbox noises can be on Peugeot 508, and second, what are the solutions available to you.
Classical reverse Peugeot 508 noises and some tips to preserve your gearbox
Why does the reversing of my Peugeot 508 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise induced by the reversing of your Peugeot 508 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will exert on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you experience a reverse noise on your Peugeot 508 if you shift gear under these conditions.
Diverse Peugeot 508 reversing noises and their origins
Finally in this section, we will move on to what you are probably most interested in this document, to find out about the cause of reversing noise on Peugeot 508. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Peugeot 508, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this document for more details about strut mount noises on Peugeot 508.
An increased reverse knocking noise on Peugeot 508X
If you are subject to a knocking noise when you are in reverse with your Peugeot 508 and this noise tends to increase as you gain speed. It is possible that you are going through a serious issue that needs to be fixed right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears before long. Take your vehicle to your auto technician quickly or read this content page about gearbox noise on Peugeot 508 for more data.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot 508 reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.