It is never pleasant to acknowledge a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that continues on your Peugeot 205? Any gearbox problem can be important, but before making sure, it is better to do a few checks. Our team has written this article to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Peugeot 205, and second, what are the solutions available to you.
Classical reverse Peugeot 205 noises and some tips to maintain your gearbox
Why does the reversing of my Peugeot 205 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound generated by the reversing of your Peugeot 205 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. Indeed, the pressure you will apply on the gears will be enormous and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Peugeot 205 if you shift gear under these conditions.
Several Peugeot 205 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this content, to learn about the source of reversing noise on Peugeot 205. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Peugeot 205, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this content for more details about strut mount noises on Peugeot 205.
An increased reverse knocking noise on Peugeot 205X
If you are subject to a knocking noise when you are in reverse with your Peugeot 205 and this noise tends to amplify as you gain speed. It is conceivable that you are dealing with a serious problem that needs to be resolved very fast before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your vehicle to your auto mechanic quickly or browse this content page about gearbox noise on Peugeot 205 for more data.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot 205 reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
