It is never enjoyable to notice a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you detect a reversing gear noise that lasts on your Opel Vectra? Any gearbox issue can be important, but before making sure, it is better to do a few inspections. Our team has made this content page to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Opel Vectra, and second, what are the solutions available to you.
Classical reverse Opel Vectra noises and some tips to maintain your gearbox
Why does the reversing of my Opel Vectra make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound made by the reversing of your Opel Vectra is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will exert on the gears will be significant and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you perceive a reverse noise on your Opel Vectra if you shift gear under these conditions.
Diverse Opel Vectra reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the origin of reversing noise on Opel Vectra. Here are the 3 typical sounds you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Opel Vectra, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this content for more info about strut mount noises on Opel Vectra.
An increased reverse knocking noise on Opel VectraX
If you are subject to a knocking noise when you are in reverse with your Opel Vectra and this noise tends to amplify as you gain speed. It is plausible that you are experiencing a serious issue that needs to be solved rather quickly before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your automobile to your mechanic quickly or browse this content about gearbox noise on Opel Vectra for more data.
I discover a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Opel Vectra reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
