It is never pleasing to listen to a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that lasts on your Nissan Rogue? Any gearbox trouble can be severe, but before making sure, it is better to do a few inspections. Our team has made this article to support you solve it. First, we will see what the origins and the different gearbox noises can be on Nissan Rogue, and second, what are the solutions available to you.
Classical reverse Nissan Rogue noises and some tips to look after your gearbox
Why does the reversing of my Nissan Rogue make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The noise created by the reversing of your Nissan Rogue is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will exert on the gears will be significant and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you hear a reverse noise on your Nissan Rogue if you shift gear under these conditions.
Diverse Nissan Rogue reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to learn about the cause of reversing noise on Nissan Rogue. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your Nissan Rogue, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this content for more details about strut mount noises on Nissan Rogue.
An increased reverse knocking noise on Nissan RogueX
If you are subject to a knocking noise when you are in reverse with your Nissan Rogue and this noise tends to amplify as you gain speed. It is plausible that you are going through a serious trouble that needs to be fixed as soon as possible before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your vehicle to your technician quickly or browse this article about gearbox noise on Nissan Rogue for more details.
I acknowledge a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Nissan Rogue reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
