It is never pleasing to discover a sound on your vehicle that you don’t know where it comes from. You may be wondering what to do when you identify a reversing gear noise that remains on your Nissan Cube? Any gearbox trouble can be important, but before making sure, it is better to do a few investigations. Our team has made this document to support you resolve it. First, we will see what the origins and the different gearbox noises can be on Nissan Cube, and second, what are the solutions available to you.
Classical reverse Nissan Cube noises and some tips to look after your gearbox
Why does the reversing of my Nissan Cube make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise created by the reversing of your Nissan Cube is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be enormous and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you listen to a reverse noise on your Nissan Cube if you shift gear under these conditions.
Several Nissan Cube reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this document, to find out about the cause of reversing noise on Nissan Cube. Here are the 3 typical sounds you may be victim of.
I experience a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Nissan Cube, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this article for more info about strut mount noises on Nissan Cube.
An increased reverse knocking noise on Nissan CubeX
If you are subject to a knocking noise when you are in reverse with your Nissan Cube and this noise tends to amplify as you gain speed. It is conceivable that you are going through a serious trouble that needs to be solved fairly quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your repair shop quickly or browse this article about gearbox noise on Nissan Cube for more information.
I notice a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Nissan Cube reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
