It is never pleasant to notice a sound on your automobile that you don’t know where it comes from. You may be wondering what to do when you detect a reversing gear noise that continues on your Mitsubishi L200? Any gearbox trouble can be critical, but before making sure, it is better to do a few checks. Our team has written this content page to help you deal with it. First, we will see what the sources and the different gearbox noises can be on Mitsubishi L200, and second, what are the solutions available to you.
Classical reverse Mitsubishi L200 noises and some tips to preserve your gearbox
Why does the reversing of my Mitsubishi L200 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound made by the reversing of your Mitsubishi L200 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will put in on the gears will be significant and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you experience a reverse noise on your Mitsubishi L200 if you shift gear under these conditions.
Different Mitsubishi L200 reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this page, to learn about the cause of reversing noise on Mitsubishi L200. Here are the 3 typical sounds you may be victim of.
I find out a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Mitsubishi L200, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this content for more details about strut mount noises on Mitsubishi L200.
An increased reverse knocking noise on Mitsubishi L200X
If you are subject to a knocking noise when you are in reverse with your Mitsubishi L200 and this noise tends to increase as you gain speed. It is possible that you are going through a serious trouble that needs to be resolved rather quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears quickly. Take your automobile to your auto mechanic quickly or browse this article about gearbox noise on Mitsubishi L200 for more data.
I find out a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Mitsubishi L200 reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
