It is never pleasant to experience a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that continues on your Lincoln MKX? Any gearbox issue can be critical, but before making sure, it is better to do a few investigations. Our team has made this content page to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Lincoln MKX, and second, what are the solutions available to you.
Classical reverse Lincoln MKX noises and some tips to protect your gearbox
Why does the reversing of my Lincoln MKX make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The noise caused by the reversing of your Lincoln MKX is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be enormous and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you notice a reverse noise on your Lincoln MKX if you shift gear under these conditions.
Several Lincoln MKX reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to learn about the cause of reversing noise on Lincoln MKX. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Lincoln MKX, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this content page for more info about strut mount noises on Lincoln MKX.
An increased reverse knocking noise on Lincoln MKXX
If you are subject to a knocking noise when you are in reverse with your Lincoln MKX and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious issue that needs to be resolved right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your vehicle to your auto mechanic quickly or check out this content page about gearbox noise on Lincoln MKX for more details.
I listen to a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Lincoln MKX reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
