It is never pleasurable to perceive a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that remains on your Jeep Gladiator? Any gearbox problem can be critical, but before making sure, it is better to do a few investigations. Our team has made this article to support you solve it. First, we will see what the origins and the different gearbox noises can be on Jeep Gladiator, and second, what are the solutions available to you.
Classical reverse Jeep Gladiator noises and some tips to look after your gearbox
Why does the reversing of my Jeep Gladiator make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise created by the reversing of your Jeep Gladiator is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will apply on the gears will be significant and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Jeep Gladiator if you shift gear under these conditions.
Diverse Jeep Gladiator reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this document, to find out about the origin of reversing noise on Jeep Gladiator. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Jeep Gladiator, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this paper for more details about strut mount noises on Jeep Gladiator.
An increased reverse knocking noise on Jeep GladiatorX
If you are subject to a knocking noise when you are in reverse with your Jeep Gladiator and this noise tends to build up as you gain speed. It is possible that you are experiencing a serious problem that needs to be resolved right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your automobile to your auto technician quickly or read this document about gearbox noise on Jeep Gladiator for more details.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Jeep Gladiator reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
