It is never enjoyable to experience a sound on your automobile that you don’t know where it comes from. You may be questioning what to do when you find a reversing gear noise that lasts on your Hyundai Tucson? Any gearbox issue can be important, but before making sure, it is better to do a few investigations. Our team has written this paper to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Hyundai Tucson, and second, what are the solutions available to you.
Classical reverse Hyundai Tucson noises and some tips to protect your gearbox
Why does the reversing of my Hyundai Tucson make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise generated by the reversing of your Hyundai Tucson is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will exert on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you listen to a reverse noise on your Hyundai Tucson if you shift gear under these conditions.
Diverse Hyundai Tucson reversing noises and their triggers
Finally in this section, we will move on to what you are probably most interested in this page, to learn about the source of reversing noise on Hyundai Tucson. Here are the 3 typical sounds you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Hyundai Tucson, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this content page for more info about strut mount noises on Hyundai Tucson.
An increased reverse knocking noise on Hyundai TucsonX
If you are subject to a knocking noise when you are in reverse with your Hyundai Tucson and this noise tends to build up as you gain speed. It is conceivable that you are dealing with a serious issue that needs to be resolved fairly quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears very fast. Take your automobile to your auto technician quickly or read this document about gearbox noise on Hyundai Tucson for more data.
I find out a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Tucson reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
