It is never pleasing to perceive a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you detect a reversing gear noise that continues on your Hyundai Ix35? Any gearbox trouble can be serious, but before making sure, it is better to do a few investigations. Our team has created this article to help you fix it. First, we will see what the origins and the different gearbox noises can be on Hyundai Ix35, and second, what are the solutions available to you.
Classical reverse Hyundai Ix35 noises and some tips to look after your gearbox
Why does the reversing of my Hyundai Ix35 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise made by the reversing of your Hyundai Ix35 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will exert on the gears will be significant and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you experience a reverse noise on your Hyundai Ix35 if you shift gear under these conditions.
Diverse Hyundai Ix35 reversing noises and their origins
Finally in this section, we will move on to what you are probably most interested in this page, to learn about the cause of reversing noise on Hyundai Ix35. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Hyundai Ix35, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this article for more info about strut mount noises on Hyundai Ix35.
An increased reverse knocking noise on Hyundai Ix35X
If you are subject to a knocking noise when you are in reverse with your Hyundai Ix35 and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious trouble that needs to be fixed fairly quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears quickly. Take your car to your technician quickly or check out this article about gearbox noise on Hyundai Ix35 for more data.
I hear a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Ix35 reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
