It is never pleasing to listen to a sound on your car that you don’t know where it comes from. You may be wondering what to do when you find a reversing gear noise that persists on your Hyundai Elantra? Any gearbox issue can be severe, but before making sure, it is better to do a few investigations. Our team has made this paper to support you solve it. First, we will see what the origins and the different gearbox noises can be on Hyundai Elantra, and second, what are the solutions available to you.
Classical reverse Hyundai Elantra noises and some tips to maintain your gearbox
Why does the reversing of my Hyundai Elantra make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise induced by the reversing of your Hyundai Elantra is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will apply on the gears will be significant and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you experience a reverse noise on your Hyundai Elantra if you shift gear under these conditions.
Several Hyundai Elantra reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this page, to learn about the source of reversing noise on Hyundai Elantra. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your Hyundai Elantra, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this content page for more details about strut mount noises on Hyundai Elantra.
An increased reverse knocking noise on Hyundai ElantraX
If you are subject to a knocking noise when you are in reverse with your Hyundai Elantra and this noise tends to increase as you gain speed. It is conceivable that you are going through a serious issue that needs to be fixed as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your car to your repair shop quickly or browse this content page about gearbox noise on Hyundai Elantra for more information.
I listen to a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Elantra reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
