It is never pleasurable to discover a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you identify a reversing gear noise that remains on your Hyundai Bayon? Any gearbox trouble can be serious, but before making sure, it is better to do a few investigations. Our team has made this paper to help you resolve it. First, we will see what the origins and the different gearbox noises can be on Hyundai Bayon, and second, what are the solutions available to you.
Classical reverse Hyundai Bayon noises and some tips to look after your gearbox
Why does the reversing of my Hyundai Bayon make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise created by the reversing of your Hyundai Bayon is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be monumental and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Hyundai Bayon if you shift gear under these conditions.
Different Hyundai Bayon reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to learn about the origin of reversing noise on Hyundai Bayon. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Hyundai Bayon, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this article for more information about strut mount noises on Hyundai Bayon.
An increased reverse knocking noise on Hyundai BayonX
If you are subject to a knocking noise when you are in reverse with your Hyundai Bayon and this noise tends to amplify as you gain speed. It is conceivable that you are going through a serious trouble that needs to be solved quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your car to your repair shop quickly or browse this content page about gearbox noise on Hyundai Bayon for more data.
I notice a noise when I go in reverse
Listening a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Bayon reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
