It is never pleasurable to find out a sound on your car that you don’t know where it comes from. You may be questioning what to do when you detect a reversing gear noise that lasts on your Hyundai Accent? Any gearbox problem can be critical, but before making sure, it is better to do a few inspections. Our team has created this document to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Hyundai Accent, and second, what are the solutions available to you.
Classical reverse Hyundai Accent noises and some tips to preserve your gearbox
Why does the reversing of my Hyundai Accent make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise generated by the reversing of your Hyundai Accent is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will apply on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you notice a reverse noise on your Hyundai Accent if you shift gear under these conditions.
Diverse Hyundai Accent reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this page, to learn about the cause of reversing noise on Hyundai Accent. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Hyundai Accent, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this content for more details about strut mount noises on Hyundai Accent.
An increased reverse knocking noise on Hyundai AccentX
If you are subject to a knocking noise when you are in reverse with your Hyundai Accent and this noise tends to increase as you gain speed. It is possible that you are confronting a serious problem that needs to be solved rather quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your car to your mechanic quickly or read this content about gearbox noise on Hyundai Accent for more details.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Accent reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
