It is never enjoyable to hear a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you identify a reversing gear noise that remains on your Honda Ridgeline? Any gearbox trouble can be important, but before making sure, it is better to do a few investigations. Our team has made this document to support you deal with it. First, we will see what the sources and the different gearbox noises can be on Honda Ridgeline, and second, what are the solutions available to you.
Classical reverse Honda Ridgeline noises and some tips to protect your gearbox
Why does the reversing of my Honda Ridgeline make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound made by the reversing of your Honda Ridgeline is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. Indeed, the pressure you will apply on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Honda Ridgeline if you shift gear under these conditions.
Diverse Honda Ridgeline reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this document, to learn about the source of reversing noise on Honda Ridgeline. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Honda Ridgeline, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this article for more info about strut mount noises on Honda Ridgeline.
An increased reverse knocking noise on Honda RidgelineX
If you are subject to a knocking noise when you are in reverse with your Honda Ridgeline and this noise tends to increase as you gain speed. It is conceivable that you are going through a serious trouble that needs to be solved quickly before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your vehicle to your repair shop quickly or browse this article about gearbox noise on Honda Ridgeline for more data.
I perceive a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda Ridgeline reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
