It is never pleasing to discover a sound on your car that you don’t know where it comes from. You may be wondering what to do when you detect a reversing gear noise that lasts on your Honda Element? Any gearbox problem can be serious, but before making sure, it is better to do a few inspections. Our team has written this article to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Honda Element, and second, what are the solutions available to you.
Classical reverse Honda Element noises and some tips to maintain your gearbox
Why does the reversing of my Honda Element make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The sound made by the reversing of your Honda Element is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will put in on the gears will be monumental and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you listen to a reverse noise on your Honda Element if you shift gear under these conditions.
Diverse Honda Element reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the source of reversing noise on Honda Element. Here are the 3 typical sounds you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Honda Element, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check this content page for more info about strut mount noises on Honda Element.
An increased reverse knocking noise on Honda ElementX
If you are subject to a knocking noise when you are in reverse with your Honda Element and this noise tends to amplify as you gain speed. It is possible that you are experiencing a serious problem that needs to be fixed very fast before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your car to your auto mechanic quickly or read this document about gearbox noise on Honda Element for more data.
I discover a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda Element reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
