It is never enjoyable to discover a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you detect a reversing gear noise that continues on your Honda E? Any gearbox trouble can be severe, but before making sure, it is better to do a few checks. Our team has created this content page to help you solve it. First, we will see what the origins and the different gearbox noises can be on Honda E, and second, what are the solutions available to you.
Classical reverse Honda E noises and some tips to maintain your gearbox
Why does the reversing of my Honda E make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound created by the reversing of your Honda E is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be significant and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you listen to a reverse noise on your Honda E if you shift gear under these conditions.
Several Honda E reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this document, to learn about the cause of reversing noise on Honda E. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Honda E, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this paper for more details about strut mount noises on Honda E.
An increased reverse knocking noise on Honda EX
If you are subject to a knocking noise when you are in reverse with your Honda E and this noise tends to amplify as you gain speed. It is possible that you are experiencing a serious trouble that needs to be resolved very fast before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your automobile to your auto mechanic quickly or browse this document about gearbox noise on Honda E for more data.
I hear a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda E reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.
