It is never pleasing to notice a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that continues on your Honda CR V? Any gearbox trouble can be critical, but before making sure, it is better to do a few inspections. Our team has created this paper to help you solve it. First, we will see what the origins and the different gearbox noises can be on Honda CR V, and second, what are the solutions available to you.
Classical reverse Honda CR V noises and some tips to protect your gearbox
Why does the reversing of my Honda CR V make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise created by the reversing of your Honda CR V is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will apply on the gears will be significant and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Honda CR V if you shift gear under these conditions.
Several Honda CR V reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the origin of reversing noise on Honda CR V. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Honda CR V, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this content for more info about strut mount noises on Honda CR V.
An increased reverse knocking noise on Honda CR VX
If you are subject to a knocking noise when you are in reverse with your Honda CR V and this noise tends to amplify as you gain speed. It is conceivable that you are experiencing a serious trouble that needs to be solved right away before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your vehicle to your mechanic quickly or read this article about gearbox noise on Honda CR V for more details.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda CR V reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
