It is never pleasant to perceive a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that lasts on your Ford Fusion? Any gearbox issue can be severe, but before making sure, it is better to do a few inspections. Our team has written this content page to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Ford Fusion, and second, what are the solutions available to you.
Classical reverse Ford Fusion noises and some tips to protect your gearbox
Why does the reversing of my Ford Fusion make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound created by the reversing of your Ford Fusion is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will apply on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you notice a reverse noise on your Ford Fusion if you shift gear under these conditions.
Different Ford Fusion reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this document, to learn about the source of reversing noise on Ford Fusion. Here are the 3 typical noises you may be victim of.
I notice a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Ford Fusion, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check this article for more details about strut mount noises on Ford Fusion.
An increased reverse knocking noise on Ford FusionX
If you are subject to a knocking noise when you are in reverse with your Ford Fusion and this noise tends to amplify as you gain speed. It is possible that you are confronting a serious issue that needs to be solved fairly quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears very fast. Take your vehicle to your repair shop quickly or check out this content page about gearbox noise on Ford Fusion for more details.
I discover a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Ford Fusion reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
