It is never pleasurable to find out a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that continues on your Ford Crown Victoria? Any gearbox issue can be important, but before making sure, it is better to do a few inspections. Our team has created this article to help you eliminate it. First, we will see what the origins and the different gearbox noises can be on Ford Crown Victoria, and second, what are the solutions available to you.
Classical reverse Ford Crown Victoria noises and some tips to preserve your gearbox
Why does the reversing of my Ford Crown Victoria make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound created by the reversing of your Ford Crown Victoria is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will apply on the gears will be enormous and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you notice a reverse noise on your Ford Crown Victoria if you shift gear under these conditions.
Different Ford Crown Victoria reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this article, to find out about the origin of reversing noise on Ford Crown Victoria. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Ford Crown Victoria, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this document for more info about strut mount noises on Ford Crown Victoria.
An increased reverse knocking noise on Ford Crown VictoriaX
If you are subject to a knocking noise when you are in reverse with your Ford Crown Victoria and this noise tends to build up as you gain speed. It is possible that you are confronting a serious issue that needs to be resolved right away before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your vehicle to your auto mechanic quickly or read this article about gearbox noise on Ford Crown Victoria for more data.
I listen to a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Ford Crown Victoria reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
