It is never pleasing to hear a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that remains on your Fiat Doblo 2? Any gearbox problem can be important, but before making sure, it is better to do a few investigations. Our team has written this article to support you resolve it. First, we will see what the origins and the different gearbox noises can be on Fiat Doblo 2, and second, what are the solutions available to you.
Classical reverse Fiat Doblo 2 noises and some tips to preserve your gearbox
Why does the reversing of my Fiat Doblo 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise caused by the reversing of your Fiat Doblo 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will apply on the gears will be monumental and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Fiat Doblo 2 if you shift gear under these conditions.
Diverse Fiat Doblo 2 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this article, to learn about the source of reversing noise on Fiat Doblo 2. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Fiat Doblo 2, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this paper for more info about strut mount noises on Fiat Doblo 2.
An increased reverse knocking noise on Fiat Doblo 2X
If you are subject to a knocking noise when you are in reverse with your Fiat Doblo 2 and this noise tends to amplify as you gain speed. It is conceivable that you are experiencing a serious problem that needs to be fixed right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your vehicle to your technician quickly or check out this content page about gearbox noise on Fiat Doblo 2 for more details.
I discover a noise when I go in reverse
Listening a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Fiat Doblo 2 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.