It is never pleasant to experience a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that remains on your Dodge Dart? Any gearbox problem can be serious, but before making sure, it is better to do a few checks. Our team has created this paper to help you deal with it. First, we will see what the origins and the different gearbox noises can be on Dodge Dart, and second, what are the solutions available to you.reverse-gear-noise-dodge-dart

Classical reverse Dodge Dart noises and some tips to maintain your gearbox

Why does the reversing of my Dodge Dart make a different noise from my other speeds?

De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound caused by the reversing of your Dodge Dart is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.

Tips to limit wear on your clutch and gearbox

  • Don’t give a big boost:
    Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the automobile is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will put in on the gears will be monumental and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you experience a reverse noise on your Dodge Dart if you shift gear under these conditions.

Diverse Dodge Dart reversing noises and their triggers

Finally in this section, we will move on to what you are probably most excited about in this article, to find out about the origin of reversing noise on Dodge Dart. Here are the 3 typical sounds you may be victim of.

I notice a grinding noise when starting in reverse gear

If you experience a grinding noise when you start in reverse with your Dodge Dart, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check this content page for more details about strut mount noises on Dodge Dart.

An increased reverse knocking noise on Dodge DartX

If you are subject to a knocking noise when you are in reverse with your Dodge Dart and this noise tends to increase as you gain speed. It is possible that you are going through a serious problem that needs to be fixed quickly before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your automobile to your auto technician quickly or read this content about gearbox noise on Dodge Dart for more data.

I listen to a noise when I go in reverse

Finding out a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dodge Dart reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.