It is never pleasurable to notice a sound on your vehicle that you don’t know where it comes from. You may be wondering what to do when you notice a reversing gear noise that persists on your Dodge Challenger? Any gearbox problem can be critical, but before making sure, it is better to do a few investigations. Our team has created this article to support you solve it. First, we will see what the sources and the different gearbox noises can be on Dodge Challenger, and second, what are the solutions available to you.
Classical reverse Dodge Challenger noises and some tips to protect your gearbox
Why does the reversing of my Dodge Challenger make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound made by the reversing of your Dodge Challenger is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will apply on the gears will be enormous and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you experience a reverse noise on your Dodge Challenger if you shift gear under these conditions.
Diverse Dodge Challenger reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the source of reversing noise on Dodge Challenger. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Dodge Challenger, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this paper for more info about strut mount noises on Dodge Challenger.
An increased reverse knocking noise on Dodge ChallengerX
If you are subject to a knocking noise when you are in reverse with your Dodge Challenger and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious problem that needs to be fixed rather quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your technician quickly or check out this content page about gearbox noise on Dodge Challenger for more information.
I acknowledge a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dodge Challenger reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
