It is never pleasing to acknowledge a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you identify a reversing gear noise that remains on your Dacia Duster 2? Any gearbox problem can be serious, but before making sure, it is better to do a few inspections. Our team has made this document to help you deal with it. First, we will see what the origins and the different gearbox noises can be on Dacia Duster 2, and second, what are the solutions available to you.
Classical reverse Dacia Duster 2 noises and some tips to look after your gearbox
Why does the reversing of my Dacia Duster 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise induced by the reversing of your Dacia Duster 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will put in on the gears will be significant and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you perceive a reverse noise on your Dacia Duster 2 if you shift gear under these conditions.
Several Dacia Duster 2 reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to learn about the cause of reversing noise on Dacia Duster 2. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Dacia Duster 2, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check this content page for more info about strut mount noises on Dacia Duster 2.
An increased reverse knocking noise on Dacia Duster 2X
If you are subject to a knocking noise when you are in reverse with your Dacia Duster 2 and this noise tends to build up as you gain speed. It is possible that you are going through a serious problem that needs to be resolved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your automobile to your auto technician quickly or check out this article about gearbox noise on Dacia Duster 2 for more details.
I hear a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dacia Duster 2 reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
