It is never enjoyable to perceive a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you identify a reversing gear noise that remains on your Citroen C6? Any gearbox issue can be important, but before making sure, it is better to do a few inspections. Our team has created this paper to support you fix it. First, we will see what the sources and the different gearbox noises can be on Citroen C6, and second, what are the solutions available to you.
Classical reverse Citroen C6 noises and some tips to maintain your gearbox
Why does the reversing of my Citroen C6 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise created by the reversing of your Citroen C6 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will put in on the gears will be monumental and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you find out a reverse noise on your Citroen C6 if you shift gear under these conditions.
Different Citroen C6 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this article, to learn about the origin of reversing noise on Citroen C6. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Citroen C6, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this content for more information about strut mount noises on Citroen C6.
An increased reverse knocking noise on Citroen C6X
If you are subject to a knocking noise when you are in reverse with your Citroen C6 and this noise tends to build up as you gain speed. It is plausible that you are confronting a serious issue that needs to be solved quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears very fast. Take your automobile to your repair shop quickly or browse this content page about gearbox noise on Citroen C6 for more data.
I hear a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Citroen C6 reverse gear makes more noise than before, it is plausible that filings have been made and are moving around in it. It is therefore time to empty the box.
