It is never enjoyable to find out a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that persists on your Citroen C-crosser? Any gearbox issue can be severe, but before making sure, it is better to do a few inspections. Our team has created this document to help you eliminate it. First, we will see what the origins and the different gearbox noises can be on Citroen C-crosser, and second, what are the solutions available to you.
Classical reverse Citroen C-crosser noises and some tips to look after your gearbox
Why does the reversing of my Citroen C-crosser make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise caused by the reversing of your Citroen C-crosser is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will exert on the gears will be significant and you will generate a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Citroen C-crosser if you shift gear under these conditions.
Several Citroen C-crosser reversing noises and their causes
Finally in this section, we will move on to what you are probably most interested in this page, to find out about the source of reversing noise on Citroen C-crosser. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Citroen C-crosser, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check this content page for more details about strut mount noises on Citroen C-crosser.
An increased reverse knocking noise on Citroen C-crosserX
If you are subject to a knocking noise when you are in reverse with your Citroen C-crosser and this noise tends to amplify as you gain speed. It is possible that you are confronting a serious issue that needs to be solved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your automobile to your auto technician quickly or browse this content page about gearbox noise on Citroen C-crosser for more data.
I acknowledge a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Citroen C-crosser reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
