It is never pleasurable to find out a sound on your automobile that you don’t know where it comes from. You may be questioning what to do when you find a reversing gear noise that lasts on your Citroen Berlingo? Any gearbox trouble can be serious, but before making sure, it is better to do a few investigations. Our team has created this paper to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Citroen Berlingo, and second, what are the solutions available to you.
Classical reverse Citroen Berlingo noises and some tips to maintain your gearbox
Why does the reversing of my Citroen Berlingo make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound induced by the reversing of your Citroen Berlingo is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will apply on the gears will be significant and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you perceive a reverse noise on your Citroen Berlingo if you shift gear under these conditions.
Different Citroen Berlingo reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to find out about the cause of reversing noise on Citroen Berlingo. Here are the 3 typical sounds you may be victim of.
I experience a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Citroen Berlingo, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this article for more details about strut mount noises on Citroen Berlingo.
An increased reverse knocking noise on Citroen BerlingoX
If you are subject to a knocking noise when you are in reverse with your Citroen Berlingo and this noise tends to amplify as you gain speed. It is possible that you are dealing with a serious trouble that needs to be fixed very fast before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your automobile to your auto mechanic quickly or read this article about gearbox noise on Citroen Berlingo for more data.
I find out a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Citroen Berlingo reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.
