It is never pleasing to notice a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that remains on your Chrysler Sebring? Any gearbox problem can be important, but before making sure, it is better to do a few investigations. Our team has created this content page to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Chrysler Sebring, and second, what are the solutions available to you.
Classical reverse Chrysler Sebring noises and some tips to preserve your gearbox
Why does the reversing of my Chrysler Sebring make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The sound generated by the reversing of your Chrysler Sebring is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will put in on the gears will be monumental and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you notice a reverse noise on your Chrysler Sebring if you shift gear under these conditions.
Several Chrysler Sebring reversing noises and their causes
Finally in this section, we will move on to what you are probably most curious about in this content, to find out about the origin of reversing noise on Chrysler Sebring. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Chrysler Sebring, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this paper for more details about strut mount noises on Chrysler Sebring.
An increased reverse knocking noise on Chrysler SebringX
If you are subject to a knocking noise when you are in reverse with your Chrysler Sebring and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious problem that needs to be resolved fairly quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your vehicle to your auto mechanic quickly or browse this content about gearbox noise on Chrysler Sebring for more details.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Chrysler Sebring reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.