It is never enjoyable to notice a sound on your automobile that you don’t know where it comes from. You may be questioning what to do when you find a reversing gear noise that lasts on your Chevrolet Camaro? Any gearbox problem can be important, but before making sure, it is better to do a few investigations. Our team has made this content page to help you deal with it. First, we will see what the origins and the different gearbox noises can be on Chevrolet Camaro, and second, what are the solutions available to you.reverse-gear-noise-chevrolet-camaro

Classical reverse Chevrolet Camaro noises and some tips to maintain your gearbox

Why does the reversing of my Chevrolet Camaro make a different noise from my other speeds?

De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise caused by the reversing of your Chevrolet Camaro is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.

Tips to reduce wear on your clutch and gearbox

  • Don’t give a big boost:
    In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the automobile is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will put in on the gears will be significant and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you notice a reverse noise on your Chevrolet Camaro if you shift gear under these conditions.

Different Chevrolet Camaro reversing noises and their causes

Finally in this section, we will move on to what you are probably most interested in this article, to learn about the source of reversing noise on Chevrolet Camaro. Here are the 3 typical sounds you may be victim of.

I hear a grinding noise when starting in reverse gear

If you notice a grinding noise when you start in reverse with your Chevrolet Camaro, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this article for more details about strut mount noises on Chevrolet Camaro.

An increased reverse knocking noise on Chevrolet CamaroX

If you are subject to a knocking noise when you are in reverse with your Chevrolet Camaro and this noise tends to build up as you gain speed. It is plausible that you are going through a serious problem that needs to be fixed as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your automobile to your technician quickly or check out this content page about gearbox noise on Chevrolet Camaro for more data.

I hear a noise when I go in reverse

Listening a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Chevrolet Camaro reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.