On occasion your car can make noises in the front axle, you are very certainly not reassured by this kind of noise and you immediately tend to think that you will lose a wheel or that the repair will cost you an huge amount. Then, what if you detect a noise coming from the front end of your Renault Twingo 2? It may not be much and you can correct the problem yourself, but if in doubt it is better to check before a larger failure takes place. It is with this in mind that we have chosen to compose this content and allow you to locate the problem and find a treatment. We will, through different steps review all the components that can generate noises at the front end of your Renault Twingo 2. 
What are the elements that can cause front axle noise Renault Twingo 2?
Most of our job will focus on finding the element that gives your Renault Twingo 2 front wheel noise. The following is a list of the components that are most likely to be producing it and how to validate it.
Noise vibration front end Renault Twingo 2 : the shock absorber cup
One of the most classic causes of symptoms on your Renault Twingo 2 front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the problem that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them quickly as this may damage other components and require more expensive repairs.
Noise while turning front end Renault Twingo 2 : stabilizer bar
If you recognise of a noise on your Renault Twingo 2 at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is faulty. To validate the origin of the problem, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front axle noise when turning Renault Twingo 2 : direction triangles
Finally, you may have a noise in the front wheel on your Renault Twingo 2, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your mechanic.
Loud noise front end Renault Twingo 2 : bearings
One of the other possible origins of symptoms of the front axle of your Renault Twingo 2, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So you should check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noise on Renault Twingo 2, you will probably find a solution to your problem.
Front end noise squeaking Renault Twingo 2 : cardan shaft
One of the most traditional causes when noise happens on the front axle of your Renault Twingo 2 when you turn with your vehicle is linked to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Renault Twingo 2, do not hesitate to consult this article to find the solution to your problem.
