When you observe unusual noises on your Volvo V50 you tend to worry. Specifically when you feel a noise coming from the release bearing of your Volvo V50. It is directly assimilated to an engine trouble and can therefore be serious. As we know that you do not take these problems lightly, we have chosen to create this content to support you locate the causes and free yourself from this issues as quickly as possible. To do this, we will first focus on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Volvo V50 and their sources.
What is the role and operation of the release bearing on Volvo V50?
Purpose of the release bearing on Volvo V50
The release bearing of your Volvo V50 has a essential role in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Volvo V50.
Function of release bearing Volvo V50
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (depending on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct kind of release bearing Volvo V50 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, unlike the hydraulic form, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the kind most used in contemporary automobiles. It is however more complex than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
More conventional clutch stop
Release bearing noises Volvo V50 and their sources
I feel a release bearing noise on Volvo V50 each time I drive and it stops when I release my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which circumstance it is time to swap the release bearing of your Volvo V50.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the system to run normally.
I feel a grinding noise coming from the release bearing of my Volvo V50 when I try to shift gears and they do not shift
This issues happens most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Volvo V50, then you probably have a leak coming from your release bearing. It must therefore be swapped as soon as possible or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Volvo V50 and it’s not from your release bearing, check this article to have more informations.
