When you find out about unusual noises on your Volkswagen New Beetle you tend to get worried. Specifically when you feel a noise coming from the release bearing of your Volkswagen New Beetle. It is immediately assimilated to an engine problem and can therefore be serious. As we know that you do not take these concerns lightly, we have chosen to make this article content to help you find the causes and free yourself from this matter as quickly as possible. To do this, we will first concentrate on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Volkswagen New Beetle and their sources.
What is the purpose and operation of the release bearing on Volkswagen New Beetle?
Function of the release bearing on Volkswagen New Beetle
The release bearing of your Volkswagen New Beetle has a essential purpose in the operation of your entire gearbox system. Indeed, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Volkswagen New Beetle.
Objective of release bearing Volkswagen New Beetle
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct kind of release bearing Volkswagen New Beetle :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, unlike the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the type most used in modern vehicles. It is however more complex than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Volkswagen New Beetle and their sources
I feel a release bearing noise on Volkswagen New Beetle in cases where I drive and it stops when I release my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which situation it is time to swap the release bearing of your Volkswagen New Beetle.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is linked with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is degraded. Indeed, this noise often comes from the broken fork that no longer allows the device to operate normally.
I feel a grinding noise coming from the release bearing of my Volkswagen New Beetle when I try to shift gears and they do not shift
This matter shows up most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Volkswagen New Beetle, then you probably have a leak coming from your release bearing. It must therefore be replaced fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Volkswagen New Beetle and it’s not from your release bearing, check this article to have more informations.
