When you locate unusual noises on your Ram P/U you tend to be concerned. Specifically when you encounter a noise coming from the release bearing of your Ram P/U. It is directly assimilated to an engine issue and can therefore be serious. As we know that you do not take these concerns lightly, we have decided to create this document to support you find the causes and free yourself from this concern as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Ram P/U and their sources.
What is the task and operation of the release bearing on Ram P/U?
Task of the release bearing on Ram P/U
The release bearing of your Ram P/U has a major function in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Ram P/U.
Objective of release bearing Ram P/U
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct sort of release bearing Ram P/U :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two sort of release bearing . This one, as opposed to the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the type most used in contemporary vehicles. It is however more complicated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure straight from the clutch pedal.
More conventional clutch stop
Release bearing noises Ram P/U and their sources
I encounter a release bearing noise on Ram P/U in cases where I drive and it stops when I depress my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which case it is time to swap the release bearing of your Ram P/U.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is deteriorated. In fact, this noise often comes from the broken fork that no longer allows the device to work normally.
I encounter a grinding noise coming from the release bearing of my Ram P/U when I try to shift gears and they do not shift
This concern happens most often on models equipped with hydraulic release bearing. It is often associated with a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Ram P/U, then you probably have a leak coming from your release bearing. It must therefore be changed fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Ram P/U and it’s not from your release bearing, check this article to have more informations.