When you locate unusual noises on your Peugeot 607 you usually tend to get worried. Especially when you encounter a noise coming from the release bearing of your Peugeot 607. It is instantly assimilated to an engine trouble and can therefore be serious. As we know that you do not take these trouble lightly, we have decided to write this article content to support you find the causes and free yourself from this concern as quickly as possible. To do this, we will first focus on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Peugeot 607 and their origins.
What is the function and operation of the release bearing on Peugeot 607?
Task of the release bearing on Peugeot 607
The release bearing of your Peugeot 607 has a major role in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Peugeot 607.
Objective of release bearing Peugeot 607
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct types of release bearing Peugeot 607 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, as opposed to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the version most used in modern cars. It is however more complicated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure straight from the clutch pedal.
More conventional clutch stop
Release bearing noises Peugeot 607 and their origins
I encounter a release bearing noise on Peugeot 607 once I drive and it stops when I release my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the reason. Make sure that this noise stops when you disengage, in which case it is time to change the release bearing of your Peugeot 607.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the system to work normally.
I encounter a grinding noise coming from the release bearing of my Peugeot 607 when I try to shift gears and they do not shift
This concern shows up most often on models equipped with hydraulic release bearing. It is often related to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Peugeot 607, then you probably have a leak coming from your release bearing. It must therefore be replaced fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Peugeot 607 and it’s not from your release bearing, check this article to have more informations.
