When you observe unusual noises on your Nissan Micra 5 you tend to be concerned. Especially when you encounter a noise coming from the release bearing of your Nissan Micra 5. It is immediately assimilated to an engine issue and can therefore be serious. As we know that you do not take these problems lightly, we have decided to make this content page to support you find the causes and free yourself from this issues as quickly as possible. To do this, we will first concentrate on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Nissan Micra 5 and their sources.
What is the purpose and operation of the release bearing on Nissan Micra 5?
Role of the release bearing on Nissan Micra 5
The release bearing of your Nissan Micra 5 has a crucial role in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Nissan Micra 5.
Objective of release bearing Nissan Micra 5
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (depending on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct types of release bearing Nissan Micra 5 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, in contrast to the hydraulic version, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the kind most used in modern cars. It is however more complicated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Nissan Micra 5 and their sources
I encounter a release bearing noise on Nissan Micra 5 in cases where I drive and it stops when I depress my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which case it is time to swap the release bearing of your Nissan Micra 5.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is degraded. In fact, this noise often comes from the broken fork that no longer allows the device to operate normally.
I encounter a grinding noise coming from the release bearing of my Nissan Micra 5 when I try to shift gears and they do not shift
This issues happens most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Nissan Micra 5, then you probably have a leak coming from your release bearing. It must therefore be changed fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Nissan Micra 5 and it’s not from your release bearing, check this article to have more informations.
