When you find out about unusual noises on your Mitsubishi Mirage you commonly tend to be concerned. Specifically when you feel a noise coming from the release bearing of your Mitsubishi Mirage. It is directly assimilated to an engine issue and can therefore be serious. As we know that you do not take these problems lightly, we have chosen to create this article to support you locate the causes and free yourself from this concern as quickly as possible. To do this, we will first focus on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Mitsubishi Mirage and their origins.
What is the function and operation of the release bearing on Mitsubishi Mirage?
Purpose of the release bearing on Mitsubishi Mirage
The release bearing of your Mitsubishi Mirage has a major role in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Mitsubishi Mirage.
Function of release bearing Mitsubishi Mirage
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct variants of release bearing Mitsubishi Mirage :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two variants of release bearing . This one, compared with the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the type most used in contemporary automobiles. It is however more elaborate than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
More conventional clutch stop
Release bearing noises Mitsubishi Mirage and their origins
I feel a release bearing noise on Mitsubishi Mirage each time I drive and it stops when I release my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly plausible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which case it is time to swap the release bearing of your Mitsubishi Mirage.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is linked with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the system to operate normally.
I feel a grinding noise coming from the release bearing of my Mitsubishi Mirage when I try to shift gears and they do not shift
This concern appears most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Mitsubishi Mirage, then you probably have a leak coming from your release bearing. It must therefore be swapped almost instantly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Mitsubishi Mirage and it’s not from your release bearing, check this article to have more informations.
