When you notice unusual noises on your Lincoln MKC you commonly tend to be concerned. Specifically when you feel a noise coming from the release bearing of your Lincoln MKC. It is immediately assimilated to an engine issue and can therefore be serious. As we know that you do not take these concerns lightly, we have chosen to write this content page to support you locate the triggers and free yourself from this issues as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Lincoln MKC and their sources.
What is the purpose and operation of the release bearing on Lincoln MKC?
Function of the release bearing on Lincoln MKC
The release bearing of your Lincoln MKC has a crucial purpose in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Lincoln MKC.
Action of release bearing Lincoln MKC
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (based on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different variants of release bearing Lincoln MKC :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two variants of release bearing . This one, contrary to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the version most used in contemporary automobiles. It is however more sophisticated than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
More conventional clutch stop
Release bearing noises Lincoln MKC and their sources
I feel a release bearing noise on Lincoln MKC when I drive and it stops when I depress my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which situation it is time to replace the release bearing of your Lincoln MKC.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is degraded. Indeed, this noise often comes from the broken fork that no longer allows the device to run normally.
I feel a grinding noise coming from the release bearing of my Lincoln MKC when I try to shift gears and they do not shift
This issues shows up most often on models equipped with hydraulic release bearing. It is often related to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Lincoln MKC, then you probably have a leak coming from your release bearing. It must therefore be replaced quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Lincoln MKC and it’s not from your release bearing, check this article to have more informations.
