When you observe unusual noises on your hyundai i20 you have a tendency to be troubled. Especially when you feel a noise coming from the release bearing of your hyundai i20. It is directly assimilated to an engine problem and can therefore be serious. As we know that you do not take these trouble lightly, we have decided to make this content page to support you find the triggers and free yourself from this issues as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on hyundai i20 and their origins.
What is the purpose and operation of the release bearing on hyundai i20?
Task of the release bearing on hyundai i20
The release bearing of your hyundai i20 has a crucial function in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your hyundai i20.
Action of release bearing hyundai i20
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct kind of release bearing hyundai i20 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, in contrast to the hydraulic form, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the type most used in contemporary automobiles. It is however more complicated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure straight from the clutch pedal.
More conventional clutch stop
Release bearing noises hyundai i20 and their origins
I feel a release bearing noise on hyundai i20 each time I drive and it stops when I depress my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the cause. Make sure that this noise stops when you disengage, in which circumstance it is time to swap the release bearing of your hyundai i20.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is degraded. In fact, this noise often comes from the broken fork that no longer allows the device to run normally.
I feel a grinding noise coming from the release bearing of my hyundai i20 when I try to shift gears and they do not shift
This issues appears most often on models equipped with hydraulic release bearing. It is often associated with a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your hyundai i20, then you probably have a leak coming from your release bearing. It must therefore be replaced fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your hyundai i20 and it’s not from your release bearing, check this article to have more informations.
