When you observe unusual noises on your Fiat Ducato 2 you tend to be concerned. Especially when you encounter a noise coming from the release bearing of your Fiat Ducato 2. It is instantly assimilated to an engine problem and can therefore be serious. As we know that you do not take these concerns lightly, we have chosen to make this content to help you find the triggers and free yourself from this concern as quickly as possible. To do this, we will first concentrate on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Fiat Ducato 2 and their origins.
What is the task and operation of the release bearing on Fiat Ducato 2?
Role of the release bearing on Fiat Ducato 2
The release bearing of your Fiat Ducato 2 has a fundamental function in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Fiat Ducato 2.
Action of release bearing Fiat Ducato 2
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (based on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct types of release bearing Fiat Ducato 2 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, unlike the hydraulic form, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the type most used in modern automobiles. It is however more sophisticated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Fiat Ducato 2 and their origins
I encounter a release bearing noise on Fiat Ducato 2 every time I drive and it stops when I release my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which case it is time to replace the release bearing of your Fiat Ducato 2.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is degraded. In fact, this noise often comes from the broken fork that no longer allows the device to operate normally.
I encounter a grinding noise coming from the release bearing of my Fiat Ducato 2 when I try to shift gears and they do not shift
This concern shows up most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Fiat Ducato 2, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Fiat Ducato 2 and it’s not from your release bearing, check this article to have more informations.
