When you observe unusual noises on your Chevrolet Bolt you have a tendency to be troubled. Especially when you feel a noise coming from the release bearing of your Chevrolet Bolt. It is instantly assimilated to an engine problem and can therefore be serious. As we know that you do not take these trouble lightly, we have decided to create this content page to support you find the triggers and free yourself from this matter as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Chevrolet Bolt and their origins.
What is the purpose and operation of the release bearing on Chevrolet Bolt?
Role of the release bearing on Chevrolet Bolt
The release bearing of your Chevrolet Bolt has a fundamental purpose in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Chevrolet Bolt.
Objective of release bearing Chevrolet Bolt
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct sort of release bearing Chevrolet Bolt :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two sort of release bearing . This one, in contrast to the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the form most used in contemporary automobiles. It is however more elaborate than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Chevrolet Bolt and their origins
I feel a release bearing noise on Chevrolet Bolt each time I drive and it stops when I depress my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the reason. Make sure that this noise stops when you disengage, in which case it is time to change the release bearing of your Chevrolet Bolt.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is degraded. In fact, this noise often comes from the broken fork that no longer allows the device to work normally.
I feel a grinding noise coming from the release bearing of my Chevrolet Bolt when I try to shift gears and they do not shift
This matter shows up most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Chevrolet Bolt, then you probably have a leak coming from your release bearing. It must therefore be replaced as soon as possible or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Chevrolet Bolt and it’s not from your release bearing, check this article to have more informations.
